• Home
  • Ford SB Windsor B-4.000 M-351C DH-9.500 Main Iron Engine Block Fully Machined

Ford SB Windsor B-4.000 M-351C DH-9.500 Main Iron Engine Block Fully Machined

$1,714.30
SKU: PCE286.1030

Details

Brand:PCE
Part Number: PCE286.1030
Part Type:Engines, Bare Blocks
Cylinder Bore Diameter:4.000 in.
Bore & Stroke:4.185 in. x 4.125 in. Max Recommended
Cam Journal OD: Standard SBF - Can be bored to 55mm
Cam Plug:2.375 in. Dia. Cup Plug
Cylinder Wall Thickness:0.250 in. min @ 4.185 in. Bore
Deck Height: 9.500 in.
Deck Thickness:0.675 in. Min
Fuel Pump :Standard Mechanical Provision
Fuel Pump Pushrod:Standard Length
Freeze Plugs:Standard 1.500" Press In Cup Plugs
Lifter Bores: Standard SBF .8757-.8765" Honed to Size
Main Bearing Size: 2.749 in. (Standard 351c)
Main Bearing Bore: Standard 351c
Main Cap Bolts:#1 1/2" in. (2) 3/8 in. (2)
#2, 3, 4 7/16 (2) Splayed (2)
#5 1/2"in. (2) 3/8 in. (2)
Main Cap Press: 0.003-0.004 in.
Main Caps: All 5 Billet Steel. 3 Center Caps Splayed
Main Cap Register: Deep Stepped Register (No Need for Dowels)
Oil System:Wet Sump or SVO dry sump. Priority main oiling with external pump.
Oil Pump Shaft:Standard SBF
Oil Filter:Standard SBF
Oil Pan:Modified STD 351W Oil Pan
Rear Main Seal:Standard 1pc. Seal FelPro# 2921 or 2942 4.500" x 3.750" SVO
Serial No. Location:Right Front & Main Caps
Starter:Standard
Stud Holes, Head:1/2" std SVO with blind holes
Timing Chain/Gears:Uses stock 351w components
Timing Cover: Uses stock 351w cover
Torque Specs:1 - 5 1/2" in. Bolts 105ft. lbs.
2 -4 7/16"in. Bolts 65ft. lbs.
1 & 5 3/8 in. Bolts - 35 ft. lbs.
Weight:208 Lbs @ 4.125" in. Bore
Quantity:Sold individually.
Notes:Uses Cleveland main bearings. Check hood clearance before installing.
Calculator:CFM Calculator