Chevy SBC 350 Shootout Pro 1957-95 Inj Ports High Rise Intake Manifold Satin
|Part Type:||Intake Manifolds, Fuel Injected|
|Product Line:||Shootout Pro Series|
|Engine Block Style:||Stock/OEM standard deck|
|Basic Operating RPM Range:||3,000-7,000|
|Intake Section Included:||Complete|
|Fuel Rails Included:||No|
|Aftermarket Fuel Rail Required:||Yes|
|Throttle Body Included:||No|
|Supplemental Bosses Cast-In:||No|
|Supplemental Bosses Machined:||No|
|Notes:||Designed for large cubic inch or alcohol burning engines.|
These Speedmaster Shootout Pro Series Manifolds feature a larger plenum and bigger runners than the standard Shootout Manifolds. It was designed specifically for the new range of large cubic inch small blocks and works best on engines over 400 cubic inches. On the 400+ cu. in. small blocks now available there is no other manifold that will produce the power and torque. Use our Complete Fuel Rail Kit with this manifold when set up for fuel injection. This manifold can be ported out to a Fel-Pro 1207 gasket.
Many small block Chevys are being built today in the 421 to 430 cu. in. range, yet racers are trying to run the same manifolds that were designed for 400 in. or often smaller engines. So, if you have a big inch small block or an alcohol engine of any size, then you need to use a manifold that has been specifically designed for that type of engine. This manifold features a larger plenum and bigger runners. To our knowledge, there is no other 23 in. head intake manifold that has been specifically produced for big inch engines. These Shootout Pro intake manifolds have injector bosses and are available machined for injectors. Dyno tests show excellent results on injected engines, even with the larger runners, since the manifolds run dry.