Chevy SBC 350 Qualifier 1957-95 Intake Manifold Ceramic Coated
|Part Type:||Intake Manifolds, Carbureted|
|Product Line:||Qualifier Series|
|Engine Block Style:||Stock/OEM standard deck|
|Intake Style:||Dual plane|
|Basic Operating RPM Range:||1,500-6,500|
|Intake Manifold Height:||4.650 in.|
|Notes:||Includes bushings for 1987-95 iron heads. Check hood clearance before installing.|
The PCE Qualifier Manifold is a high performance dual plane, 180 degrees street manifold designed to be used with Holley, Carter AFB, or Edelbrock square bore carbs.
For street applications use 600-700 cfm vacuum secondary carbs. For high performance street, use 700- 800 cfm double pumper carburetors. This manifold produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane. This manifold also features cast-in nitrous bosses with water outlets at all four corners plus dual distributor holddowns.
This manifold is 0.70-inches taller than the PCE147.1001 or PCE147.1002. It has a provision to add an oil fill tube. No provision for exhaust heated or stock style chokes. Accepts late model waterneck, A/C, alternator, and HEI. Will fit cast iron bow tie heads and '87-'95 cast iron or aluminum heads. Will not fit under a stock Vette hood.